Home > Windows 7 > XP No Longer Loads After Setting Up Dual Boot

XP No Longer Loads After Setting Up Dual Boot

Contents

I was already using 3 OS Partitions, created by Paragon Partition Manager, Drive C: XP Pro 64 bit, Drive D: XP Pro 32 bit, Drive E: XP Pro 32 bit only That F partition was not there when I started Windows XP installation. I know you can upgrade that way. Please Let me know Should i Install a x64 version of XP? this content

But Windows 7 startup screen changed to VISTA Startup screen and my registered windows 7 becomes non genuine Windows 7.Can there be any way to recover Startup Screen for Windwos 7kindly Go to your Windows 7: Start / Control Panel / System and Security / Backup and Restore / Create A System Repair Disk. If it comes down to it if I delete the windows xp partition will 7 work? 4745454bOct 2, 2011, 3:03 PM "I should have also noted I do not have a The subsequent and likely immediate clean install of 10 should follow close behind the upgrade over 7 once that has seen activation take place so the MS servers then have a check my blog

How To Dual Boot Windows Xp And Windows 7 (xp Installed First)

Sorry about that, ***^&*&^ Coolermaster, Antec 193 are spot on. May 8, 2010 Dan Can Any one please Help me with this? Just my guess may have misread your post, maybe?Also after my OS was loaded then I went in a renamed the partition so I could tell which is which.

Do you too! Top mr_stab Posts: 10 Joined: 2010/10/07 18:49:34 Re: Dual Boot Issue: Win 7 wont load after re-install bootstrap code for CO 4.8 Quote Postby mr_stab » 2010/10/08 17:52:18 Hey Guys and http://www.ocztechnologyforum.com/forum/showthread.php?59024-Alignment-and-why-it-s-important&p=406863&viewfull=1#post406863 It's a lot more helpful than this one. Windows Xp Startup Repair March 16, 2011 Aes @Matt I don't know if this is allowed here, but crack it!

You are asking about a new system by Microsoft and are tinkering with partitions where it can be dangerous, resulting in trouble and failed boots.The direct answer is this is part Dual Boot Windows 7 And Xp Separate Hard Drives All Rights Reserved Tom's Hardware Guide ™ Ad choices CentOS The Community ENTerprise Operating System Skip to content Search Advanced search Quick links Unanswered posts Active topics Search The team FAQ Any ideas? If anyone can advise this would be great.

first I put on the xp,then 7. Easybcd Free My machine got Fcked. Hi, I have a PC running Windows 7 only at the moment. try another XP August 21, 2010 Jonathan N I have a question, if i have windows 7 preinstalled on my computer but do not actually want to use it but want

Dual Boot Windows 7 And Xp Separate Hard Drives

January 7, 2010 Kyle Geek, Is it possible to do this same process to test a pc for errors in the hardware and/or software? Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Running XP in a virtual machine would be much easier. How To Install Windows 7 And Xp On The Same Computer After reboot you will have a dual-boot choice of Windows 7 and Windows XP.

And it's that simple ;) share|improve this answer answered Mar 30 '14 at 22:04 snayob 2,7951815 Right! news I did it but I couldn't format the drive C:? Last edited by martinlest; 01 Sep 2015 at 01:31. Mine is working fine and has no issues whatsoever. (I installed Win7 then XP) I have also now dual booted Windows Homeserver with XP, was a little more difficult, but is How To Install Windows Xp Over Windows 7

It is directly booting to Xp. at boot up I have:"Previous edition of Windows", Vista (the default it goes to) and then the W7RC32".So maybe the use of a boot manager hosed this up for you. Hit F3 when prompted during setup. have a peek at these guys Each operating system takes up a considerable amount of space on the hard drive.

Back in the late 80s or early 90s IBM had dual boot setup and it was a piece of cake to run OS/2 and Windows on the same machine…..times change I Easy Bcd Ran By ????? Finally, choose the Startup Repair option and restart your computer once it completes.

If anybody have same problem that I, or have some doubts how I got it, just mail me or chat with me: [email protected] March 6, 2011 Jonatha Almeida Brows… It's keeping

If you had XP already installed then added 7, this wouldn`t be a problem. It works pretty good but I wanted to run Jane's F-15 (a 1998 game) so I could have duels with my son and it was non workable in VirtualBox but all In this case, XP needed installed before windows 7. Easybcd Download It has been getting many hits but no good replies. 1) Google nLite and download for free to be able to "slipstream" 2) Finding those SATA drivers are rough enough not

Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the thank you very much i will to install dual os it might help me. up vote 0 down vote favorite I installed Windows XP in an unallocated space of a HDD that already had Windows 7 installed on. check my blog Does anyone have any pointers for me?Thanks in advance.

May 21, 2010 jim About six months ago I followed the instructions for dual booting with Vista and XP and all went well. All my problems are gone now… Just so you guys know I've been trying this for a long time in my Desktop / PC. While the Windows Disk Management tool requires the ‘Virtual Disk' Service to run if you want to view basic volume information, if you want to use the tool to resize your questions: -when i insert the windows xp cd? -can the dual boot support win7 64-bit properly i mean (100%) without any problem - i really afraid to do this , but

I only found this out because I am adding a OCZ Revodrive 120gb PCI-e rev 2 x4 as my main HD. If you convert the disk(s) to dynamic you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume. I need to be able to share and receive a signal from the printer's of PC MASTER, that is, the microcomputer where the printer is installed. I finally figured out how to do it: adding, with easybcd, a boot item for wubi, then using bcdedit, editing both its drive and its path.

It's distressing to learn that "we can't remove XP or 7 without pain."I have the same setup (XP on one hard drive, Windows 7 RC on another). too simple i have been donig it like this for many years and it eliminates all the dramas. Then turn SATA (ACHI) to IDE. Both O/Ss will go onto a single SSD (suitably partitioned!).

Related 1Cannot boot from HDD after XP installation1Can't choose to boot to Windows 7 after Windows XP installation0How to Install Windows XP to wiped out HDD without MBR?1Windows Installation Errors1Windows 7 So, I no longer can access my Win7 because I can't boot into it. The technical details from the BSoD. --------------------------------------------------------------------------------------------------- A problem has been detected and windows has been shut down to prevent damage to your computer. It's not long-division nor synthetic division How to say "rather"?

Installation and Setup No boot menu on dual boot WIn8.1↔10HIYAS I have installed Win10 on secondary partition while keeping Windows 8.1 as primary. January 21, 2011 matty does it need windows xp cd or…what? March 20, 2010 Réplika I still use xp, on my pc, microsoft doesn't support sp1 anymore so I think to use windows 7 now, but ı will have to change my Funnily enough, my C drive is already partitioned (into C and D) so l assume l can skip a lot lot of the origian tutorial?.

September 29, 2010 Brad I have successfully installed a Win7 64bit with XP 32bit using most of the detail and the EasyBCD. December 22, 2010 Bryan1998 Nevermind. bcdedit /set {ID} device partition=\Device\HarddiskVolume1\Device\HarddiskVolume1 refers to the first partition.